ST-50 / ST-51

Film Type Temperature Sensors
(Type K Thermocouple)


   
ST-50                                          ST-51                                         W-ST50A

 

Main Features

Film Type Temperature Sensors

  • 0.34mm Fiberglass Non-Woven Film or 0.13mm Polyimide（PI）Film are avaible. Ideal for measuring temperature of small objects.

 

 

 

 

 



This is a type K thermocouple

  • With the dedicated cable with a connector (W-ST-50A), the sensor can be connected to the input terminal of the instrument configured for thermocouple input type K.
  • Wide selections of cable end types are offered. For example, Y-shaped crimp terminal or TC connector.






 

Excellent response


  • Since thermal capacity of the sensor itself is very small, temperature can be quickly measured.
  • This makes the sensor suitable for collecting temperature profiles.

< ST-50B / ST-51B / ST-51SB characteristic curve>

 

 

 

Just stick it on the object


  • This sensor can be sticked on the narrow space or on the small object for easy temperature measurement.
    ・Nonwoven glass fabric type (standard)
    ・Polyimide resin type (for use in clean room)

 

 

 

 


Easy to measure temperature with a cable clamp

  • Bare end type sensors (ST-50B / ST-51B / ST-51SB) are offered for temperature measurement of tiny objects.

 

 

 

 

 

 

 

 

We can offer the following sensors with extended length

  • ST-51/ST-51B (Polyimide type) and ST-50/ST-50B (Glass fabric type) can be manufactured in a length of 500mm.

*ST-50/ST-50B are also available in a 300mm length.

 

 

 

 

 

 

Insulated Type

  • The insulated type (ST-51SC) probe prevents the thermocouple wires from contacting the target directly and measures temperature correctly.

*Heat resistant tapes or similar products are recommended while sticking the sensor to the target.

 

Measures max.300°C (572°F) temperature

  • Use of silicon adhesive enables adhesion on almost any objects except some hard-to-bond articles.
    No Siloxane is generated.

    Up to 150°C (302°F) :
    Capable of repeated use by sticking/removing the sensor.
    Up to 200°C (392°F) :
    Capable of repeated use on condition that the temperature is not lowered below 150°C.
    Up to 250°C (482°F) :
    Capable of repeated use on condition that the temperature is not lowered below 200°C.
    Above 250°C (482°F) :
    Readhesion is not possible.

    ※The number of repeated use depends on the operating environment


   
ST-50                                          ST-51                                         W-ST50A